The thickness and thickness of the cold rolling mill shell can be reduced, and the service life of the cold rolling mill shell can be effectively improved, How to control the use of equipment?
At present, China has made some achievements in this field, but there is still a gap compared with developed countries. Therefore, professional equipment manufacturers have studied the influence of oil film coil thickness, studied the corresponding method of cold compensation control of rolling mill according to the change of oil film relative thickness, and conducted theoretical research on thickness compensation control, which can be accurate according to the deviation between the actual reduction of lead screw and the required reduction, Effectively adjust the one-step reduction of the screw rod, reduce or eliminate the roller pressing the upper roller to fix the screw, and reduce or eliminate the dimensional deviation of the spacing between the upper roller and the lower roller.
At present, the processing quality of the rolling mill is better and the performance is improved. In the research process, firstly, the influence of oil film thickness on the cold rolling thickness is proposed, and the correction formula of the manufacturer's rolling mill is adjusted. It can be seen that the adjustment degree is very good. Now, the direction of the metal plate entering the rolling channel can be adjusted automatically, which reduces the labor force and recovers the coolant to improve the utilization rate. All rotating shafts are the same, And the flat surface of the produced metal plate is tight.
Lubrication device rolling mill equipped with skid nut can improve the stability of the device, and adjust the height of the device during installation. It can not only affect the lubrication effect, but also filter the lubricating oil to prevent impurities from entering the equipment, reduce the accident rate, and provide better application prospects. Now the rolling mill is provided for the personnel to use the larger measuring space, so that the personnel can accurately measure the space. Thus, the accurate positioning of the anti winding guide plate is ensured.
